Hi. can any one help me to unlock bios options or do it for me. for overclock ram or enable iGPU . here is the bin file from flash programing tool. my main bios is v305 xg. sorry for my bad english.Thanks ![Cool]( "Cool")
↧
(request) asus rog gl502vmk unlock bios options
↧
Lenovo Thinkpad x250 - Beeps and advanced menu
Hi forum ![Smile]( "Smile")
I extracted and modded my BIOS to remove the screen whitelist of the Lenovo x250.
This mod seems to have worked, but now I get 10 beeps in groups of five upon cold boot, which, as I read, comes from a mismatch between expected and present checksum. The TPM chip is set to off in BIOS, yet those beeps occur.
Can someone recreate the hashes in my BIOS or point where I can learn about doing it myself? I googled and couldn't find a tutorial.
Also, is there a way to unlock the advanced menu?
I have a CH341 programmer and thus can read and flash my BIOS.
My BIOS is here:
https://www.dropbox.com/s/d2h3onht6xisgj...s.bin?dl=0
I extracted and modded my BIOS to remove the screen whitelist of the Lenovo x250.
This mod seems to have worked, but now I get 10 beeps in groups of five upon cold boot, which, as I read, comes from a mismatch between expected and present checksum. The TPM chip is set to off in BIOS, yet those beeps occur.
Can someone recreate the hashes in my BIOS or point where I can learn about doing it myself? I googled and couldn't find a tutorial.
Also, is there a way to unlock the advanced menu?
I have a CH341 programmer and thus can read and flash my BIOS.
My BIOS is here:
https://www.dropbox.com/s/d2h3onht6xisgj...s.bin?dl=0
↧
↧
[Request] Dell optiflex 745 BIOS 2.6.6 UNLOCK
Hi, I have a dell optiflex 745 minitower computer with the version 2.3.3 bios whether it can be unlocked for overclock Q6600?
Link to PC : https://www.dell.com/support/home/pl/pl/...tiplex-745
Link to BIOS : https://downloads.dell.com/FOLDER0022441..._2.6.6.exe
Thank you very much in advance
Link to PC : https://www.dell.com/support/home/pl/pl/...tiplex-745
Link to BIOS : https://downloads.dell.com/FOLDER0022441..._2.6.6.exe
Thank you very much in advance
↧
HELP Please!!! Samsung np300e5c P09RAQ Needs to Unlock
Hi all! Ineeds to unlock P09RAQ for np300e5c, for install mac os!
Who may help me?
Scala15/17 rev1.0
bios dump from 1.2 (works correctly)
Please!
(https://yadi.sk/d/Fs_mNlyNUGw0lw) - P09RAQ.cap file
Who may help me?
Scala15/17 rev1.0
bios dump from 1.2 (works correctly)
Please!
(https://yadi.sk/d/Fs_mNlyNUGw0lw) - P09RAQ.cap file
↧
HP Pavillion 15 ab226nx Bios unlock request.
Hello sir,
I am very noobie and basically have no knowledge in bios unlocking. I bought Exp GDC Egpu and graphics card thinking that it would work. But only when I connected and saw its not working, I came to know about whitelist of ports. I need to remove the whitelist so that my money is not totally wasted. Please help
My Bios info :
Insyde
F.77
12/8/2015
Motherboard :
HP
Model : 80A4 91.1C
If any additional info required, please let me know
Thank You
I am very noobie and basically have no knowledge in bios unlocking. I bought Exp GDC Egpu and graphics card thinking that it would work. But only when I connected and saw its not working, I came to know about whitelist of ports. I need to remove the whitelist so that my money is not totally wasted. Please help
My Bios info :
Insyde
F.77
12/8/2015
Motherboard :
HP
Model : 80A4 91.1C
If any additional info required, please let me know
Thank You
↧
↧
(request) MSI B450M Mortar - disabling usb over current protection into default bios
Hi I am Johan
The Motherboard is "MSI B450M Mortar"
I have a motherboard that is almost quite bricked, it can be flashed with "bios flashback+", and the problem is that it always says "Over Current Have Been Detected On Your USB Device!" on startup, I want to disable that feature in default bios setting, so I can get boot without the error (Have read somewhere other motherboard that can be disabled the setting). (have checked the usb ports and pins, nothing inserted into usb, error still resides).
I need your help. I have tried AMIBCP4.53, cannot access the newest bios file with AMIBCP4.53, is there any other programs to mod the bios?
I got the error from very beginning, and tried RMA Motherboard, they say -> cannot be replaced.
Regards
Johan Taunajik
The Motherboard is "MSI B450M Mortar"
I have a motherboard that is almost quite bricked, it can be flashed with "bios flashback+", and the problem is that it always says "Over Current Have Been Detected On Your USB Device!" on startup, I want to disable that feature in default bios setting, so I can get boot without the error (Have read somewhere other motherboard that can be disabled the setting). (have checked the usb ports and pins, nothing inserted into usb, error still resides).
I need your help. I have tried AMIBCP4.53, cannot access the newest bios file with AMIBCP4.53, is there any other programs to mod the bios?
I got the error from very beginning, and tried RMA Motherboard, they say -> cannot be replaced.
Regards
Johan Taunajik
↧
Mercury ME945WW board AMIBIOS version 08.00.13 update
Hello my dear technical Gurus. I have this Mercury ME945WW board http://www.mercury-pc.com/product/1296 So before throwing it in dust-bin I would like to try my luck. It says Supported FSB 533 / 800 / 1066 / 1333 MHz. I am using two Kingston 2048 MB (DDR2-800) and Intel® Core™2 Duo CPU E8600 @ 3.33GHz Processor. But CPUz says that my DRAM frequency is set to 266 Mhz only. My Bios doesn't even display Ram speed so forget about any ram and fsb settings in it. Needless to mention motherboard company doesn't have any bios update. Please see all the attached screenshots of Bios version and specs. Can someone help me to tweak the board Or an Update the Bios so that I can increase my DRAM frequency / FSB ?
![.jpg]( "JPG Image")
Untitled.jpg (Size: 95.51 KB / Downloads: 2)
![.jpg]( "JPG Image")
Untitled2.jpg (Size: 103.27 KB / Downloads: 3)
![.jpg]( "JPG Image")
Untitled3.jpg (Size: 98.02 KB / Downloads: 1)
![.jpg]( "JPG Image")
75c81m2.jpg (Size: 204.58 KB / Downloads: 2)
Untitled.jpg (Size: 95.51 KB / Downloads: 2)
Untitled2.jpg (Size: 103.27 KB / Downloads: 3)
Untitled3.jpg (Size: 98.02 KB / Downloads: 1)
75c81m2.jpg (Size: 204.58 KB / Downloads: 2)
↧
Unlock Alienware 17 R3 Bios
I was wondering if anybody could point me to a guide to unlocking my bios to enable overclocking and whitelist removal (i think there is one) that isn't on mydigitallife.com. I keep getting flagged as a bot. Or if you don't mind doing it for me.
Thank You
https://1drv.ms/u/s!ArKjTWGK-_eMh-p5cla9wkb2uw2Wag
Thank You
https://1drv.ms/u/s!ArKjTWGK-_eMh-p5cla9wkb2uw2Wag
↧
[SOLICITAÇÃO] Dell i7-5500u (BIOS-Dell Inc. A09) Whitelist Removal
Olá Pessoal, tudo bem!?
Estou fazendo eGPU, mas depois de instalar todo o equipamento e ligar o botão de power
a tela do notbook fica preta e ele emite sons de bips por gerar conflito de uma terceira placa
de video. No boot o notbook não reconhece a placa.
Configuração:
Dell i7 - 5500
16 de memoria ram DDR3
Placa integrada Intel HD Graphics 5000
Placa dedicada AMD 257 2gb
Bios Dell Inc. A09
Configurações eGPU NGFF
eGPU EXP GDC
Placa GTX 1060 6gb
Fonte 350W
Estou fazendo eGPU, mas depois de instalar todo o equipamento e ligar o botão de power
a tela do notbook fica preta e ele emite sons de bips por gerar conflito de uma terceira placa
de video. No boot o notbook não reconhece a placa.
Configuração:
Dell i7 - 5500
16 de memoria ram DDR3
Placa integrada Intel HD Graphics 5000
Placa dedicada AMD 257 2gb
Bios Dell Inc. A09
Configurações eGPU NGFF
eGPU EXP GDC
Placa GTX 1060 6gb
Fonte 350W
↧
↧
Lenovo M490S WIFI whitelist bios
Hello
Please mod (whitelist) bios for my M490S HAET20WW (1.04)
results
https://mega.nz/#!ILoHiSZT!1qCQNppqPU90_...mEXjC5iw2Y
what to do backup-dump of my bios?
Universal BIOS Backup ToolKit 2.0 - "Can not identify the BIOS"
please help
Very thank You
Please mod (whitelist) bios for my M490S HAET20WW (1.04)
results
https://mega.nz/#!ILoHiSZT!1qCQNppqPU90_...mEXjC5iw2Y
what to do backup-dump of my bios?
Universal BIOS Backup ToolKit 2.0 - "Can not identify the BIOS"
please help
Very thank You
↧
(Request) Fujitsu ESPRIMO D538
For some reason, the motherboard is only running my NVME at x2, it should allow it to run x3x4, so not getting full output from it currently.
The BIOS is a little locked down, so not able to change any settings for it.
Is it possible to unlock the menu for PCIe at all? Not to bothered about anything else, just annoying that I can't make changes.
The motherboard is a D3600-A1x
Seems to have a .ROM and a .BUP within the folder. Not sure which is needed?
Thanks,
Dave
The BIOS is a little locked down, so not able to change any settings for it.
Is it possible to unlock the menu for PCIe at all? Not to bothered about anything else, just annoying that I can't make changes.
The motherboard is a D3600-A1x
Seems to have a .ROM and a .BUP within the folder. Not sure which is needed?
Thanks,
Dave
↧
(Request) Fujitsu ESPRIMO D538
For some reason, the motherboard is only running my NVME at x2, it should allow it to run x3x4, so not getting full output from it currently.
The BIOS is a little locked down, so not able to change any settings for it.
Is it possible to unlock the menu for PCIe at all? Not to bothered about anything else, just annoying that I can't make changes.
The motherboard is a D3600-A1x
Seems to have a .ROM and a .BUP within the folder. Not sure which is needed?
Thanks,
Dave
The BIOS is a little locked down, so not able to change any settings for it.
Is it possible to unlock the menu for PCIe at all? Not to bothered about anything else, just annoying that I can't make changes.
The motherboard is a D3600-A1x
Seems to have a .ROM and a .BUP within the folder. Not sure which is needed?
Thanks,
Dave
↧
[Request] Thinkpad P52 WLAN/WWAN Whitelist
Original Bios v1.24 (download the .cab file for Linux and extract)
https://support.lenovo.com/us/en/downloads/ds504024
The WWAN card is not supported in Linux under PCIe mode through the M.2 slot, however putting it into USB mode on bootup causes the error "Unauthorized wireless card". WWAN card came from Lenovo in the machine, the [censored] at Lenovo are just too lazy to work on this.
So if someone could, please remove WWAN and WLAN whitelist on this laptop. Thank you!
edit, also I'm not sure but I think you need a hardware flasher to flash the bios. There's some crazy fuse thing on this motherboard or something, idk, but I have a hardware flasher for SOIC 8. Lenovo apparently expected serious issues with BIOS (which is exactly what happened with their "Discreet Graphics" mode) and left a hole in the case specifically to access the bios chip right under the bottom plate.
https://support.lenovo.com/us/en/downloads/ds504024
The WWAN card is not supported in Linux under PCIe mode through the M.2 slot, however putting it into USB mode on bootup causes the error "Unauthorized wireless card". WWAN card came from Lenovo in the machine, the [censored] at Lenovo are just too lazy to work on this.
So if someone could, please remove WWAN and WLAN whitelist on this laptop. Thank you!
edit, also I'm not sure but I think you need a hardware flasher to flash the bios. There's some crazy fuse thing on this motherboard or something, idk, but I have a hardware flasher for SOIC 8. Lenovo apparently expected serious issues with BIOS (which is exactly what happened with their "Discreet Graphics" mode) and left a hole in the case specifically to access the bios chip right under the bottom plate.
↧
↧
ACER SPIN 5 515-51N BIOS BRICKED
Hello,
I am having trouble with client's laptop, which he allegedly bought online as the title, he tried to RMA it but he wasn't being entertained which i had not further inquired as to why, he brought it to different repair shops and ended up here. So, the said laptop was booting from before but was hanging at the acer logo with the circles going on for a few seconds then hangs, loops again and hang. I pulled out the M2 SSD drive to check if it was faulty or not, same problem. i was able to access the bios and disable the secure boot by putting passwords on it but it doesn't help if i try to boot on any flash drives or so. so i took of the battery and the cmos battery to see what would happen. i booted up, but to my surprise that the keyboard's LED and power LED lights up only a few second and turns off and loops for eternity, no displays also. seems to me i bricked the bios, must've been the same case as some guy which the windows update screws up his bios.
i tried reading around,
i came to a little light of hope that by searching for the right bios name such as <name>.fd and put it to a FAT32 flash drive
press <fn>+<esc> it would then try to recover itself.
i was able to manifest the key pressing and it responds but, it doesn't continue.
so now i need the right name for it to be able to continue.
i would like to seek assistance in this, also i tried the UEFItool to search for the .fd of it,
BuzzKBL.fd but it doesn't work. any inputs please?
Thanks in advance.
I am having trouble with client's laptop, which he allegedly bought online as the title, he tried to RMA it but he wasn't being entertained which i had not further inquired as to why, he brought it to different repair shops and ended up here. So, the said laptop was booting from before but was hanging at the acer logo with the circles going on for a few seconds then hangs, loops again and hang. I pulled out the M2 SSD drive to check if it was faulty or not, same problem. i was able to access the bios and disable the secure boot by putting passwords on it but it doesn't help if i try to boot on any flash drives or so. so i took of the battery and the cmos battery to see what would happen. i booted up, but to my surprise that the keyboard's LED and power LED lights up only a few second and turns off and loops for eternity, no displays also. seems to me i bricked the bios, must've been the same case as some guy which the windows update screws up his bios.
i tried reading around,
i came to a little light of hope that by searching for the right bios name such as <name>.fd and put it to a FAT32 flash drive
press <fn>+<esc> it would then try to recover itself.
i was able to manifest the key pressing and it responds but, it doesn't continue.
so now i need the right name for it to be able to continue.
i would like to seek assistance in this, also i tried the UEFItool to search for the .fd of it,
BuzzKBL.fd but it doesn't work. any inputs please?
Thanks in advance.
↧
[Request]upgrade cpu on MSI H61M
Hi,
Recently i had move back my country from China, when i tend to change the CPU to ivy bridge but it unsupported.
I went to China MSI but there isnt latest update.
But i found v2 doesnt support ivy bridge and v6 support ivy bridge
Any possibility to change the microcode?
![.zip]( "ZIP File")
H61M-S26v2.0.zip (Size: 2.37 MB / Downloads: 0)
![.zip]( "ZIP File")
H61M-S26v6.0.zip (Size: 2.43 MB / Downloads: 0)
![.zip]( "ZIP File")
AmericanMegatrendsInc.-4.6.4.zip (Size: 344.01 KB / Downloads: 0)
Recently i had move back my country from China, when i tend to change the CPU to ivy bridge but it unsupported.
I went to China MSI but there isnt latest update.
But i found v2 doesnt support ivy bridge and v6 support ivy bridge
Any possibility to change the microcode?
H61M-S26v2.0.zip (Size: 2.37 MB / Downloads: 0)
H61M-S26v6.0.zip (Size: 2.43 MB / Downloads: 0)
AmericanMegatrendsInc.-4.6.4.zip (Size: 344.01 KB / Downloads: 0)
↧
[REQUEST] Asus Striker II Extreme with GTX 1660ti
Hello everyone!
I am trying to boot the Asus Striker 2 Extreme with a new branded 1660ti.
The problem is that the PC wont Post. Tried the GPU in a new pc , works like a charm.
Tried an older GPU, the striker extreme 2 boots normally.
I tried with different rams, ssd, psu , cpu but no luck with 1660ti.
I have the latest bios 1402 https://www.asus.com/Motherboards/Strike...Desk_BIOS/
I guess I need some kind of modded bios to make it work. Although I have seen in the net, benchmarks running 1070 gtx with striker 2 extreme, which is more demanding than 1660ti.
Any help, appreciated.
Kind regards
Zack
I am trying to boot the Asus Striker 2 Extreme with a new branded 1660ti.
The problem is that the PC wont Post. Tried the GPU in a new pc , works like a charm.
Tried an older GPU, the striker extreme 2 boots normally.
I tried with different rams, ssd, psu , cpu but no luck with 1660ti.
I have the latest bios 1402 https://www.asus.com/Motherboards/Strike...Desk_BIOS/
I guess I need some kind of modded bios to make it work. Although I have seen in the net, benchmarks running 1070 gtx with striker 2 extreme, which is more demanding than 1660ti.
Any help, appreciated.
Kind regards
Zack
↧
reprograming bios chip
Hello,
I posted in an old subject related to TBGM01 motherboard.
Perhaps it would be beter to post a new one, because i'm newbie with bios programming.
I have a bricked motherboard from Packardbell ixtreme i9520 desktop, a ch341A usb programmer, and the chip to reprogram with the bios R01A0 from packard bell site.
But after programing the 842P8P02.ROM on the chip, the MB doesn't start. Do'nt know why.
A new chip from ebay seems to have more data on it when reading with ch341A and let my motherboard boot, but my ethernet controller is not present in peripherals.
I'm so lost.
Could you please help me.?
best regards. Sorry for the dubble posting and my poor english.
I posted in an old subject related to TBGM01 motherboard.
Perhaps it would be beter to post a new one, because i'm newbie with bios programming.
I have a bricked motherboard from Packardbell ixtreme i9520 desktop, a ch341A usb programmer, and the chip to reprogram with the bios R01A0 from packard bell site.
But after programing the 842P8P02.ROM on the chip, the MB doesn't start. Do'nt know why.
A new chip from ebay seems to have more data on it when reading with ch341A and let my motherboard boot, but my ethernet controller is not present in peripherals.
I'm so lost.
Could you please help me.?
best regards. Sorry for the dubble posting and my poor english.
↧
↧
ASUS P5KC - XEON
Hi!
I have a ASUS P5KC and i want to upgrade with:
CPU: Xeon 5450
VGA: GTX 690
RAM: 16GB DDR3 2X8GB 1333Mhz
But i have a issue with this bios
I can add CPU id on bios for XEON but when i try to install Nvidia Geforce 690GTX can´t be enable, Show me on windows10 a error i need to update a bios fo acept this VGA.
Any one know how to add VGA ID on bios?
Regards
![.zip]( "ZIP File")
P5KC-1203.zip (Size: 642.4 KB / Downloads: 0)
I have a ASUS P5KC and i want to upgrade with:
CPU: Xeon 5450
VGA: GTX 690
RAM: 16GB DDR3 2X8GB 1333Mhz
But i have a issue with this bios
I can add CPU id on bios for XEON but when i try to install Nvidia Geforce 690GTX can´t be enable, Show me on windows10 a error i need to update a bios fo acept this VGA.
Any one know how to add VGA ID on bios?
Regards
P5KC-1203.zip (Size: 642.4 KB / Downloads: 0)
↧
Autoselection of bootable device
One of my PCs has only one bootable device connected at startup time, and always boots from that device, no matter which out of four ones it is.
Another PC has 10 SATA ports which are all connected to devices, but only four of which are powered, and only one of which is bootable. It always requires me to reset boot order if I change the bootable device. Can that be tweaked so it autoselects the bootable device ? The BIOS is Award Software International 1/02/2011 SIMBIOS v 2.4
Another PC has 10 SATA ports which are all connected to devices, but only four of which are powered, and only one of which is bootable. It always requires me to reset boot order if I change the bootable device. Can that be tweaked so it autoselects the bootable device ? The BIOS is Award Software International 1/02/2011 SIMBIOS v 2.4
↧
ASUS P5KC - GFX issue - GTX690
Hi!
I have a ASUS P5KC and i want to upgrade with:
CPU: Xeon 5450
VGA: GTX 690
RAM: 16GB DDR3 2X8GB 1333Mhz
But i have a issue with this bios
I can add CPU id on bios for XEON but when i try to install Nvidia Geforce 690GTX can´t be enable, Show me on windows10 a error i need to update a bios fo acept this VGA.
Any one know how to add VGA ID on bios?
Regards
![.zip]( "ZIP File")
P5KC-1203.zip (Size: 642.4 KB / Downloads: 1)
I have a ASUS P5KC and i want to upgrade with:
CPU: Xeon 5450
VGA: GTX 690
RAM: 16GB DDR3 2X8GB 1333Mhz
But i have a issue with this bios
I can add CPU id on bios for XEON but when i try to install Nvidia Geforce 690GTX can´t be enable, Show me on windows10 a error i need to update a bios fo acept this VGA.
Any one know how to add VGA ID on bios?
Regards
P5KC-1203.zip (Size: 642.4 KB / Downloads: 1)
↧