I've been having real problems with wifi card that started after a year or so after pc had been bought(march 2016). My card in Intel AC760, and the whole lineup is probably defected, as I've read that many other people with same module started having problems after some time of using. Problems persist on linux too, and I'm out of warranty, so I want to try to mess with uefi.
↧
Thread Modes [Request] Asus N550JX Bios Unlock
↧
Dell Optiplex 7010 SFF: Make integrated graphics always enabled
Hi All,
The bios of Dell Optiplex 7010 SFF always disables my i7-3770T's HD4000 when there is no monitor connected to the onboard Displayports.
My bios' Primary Display tab only has three options:
1. Auto
2. Intel HD 4000
3. AMD Radeon WX4100
When selecting "3. AMD Radeon WX4100", HD 4000 will be disabled automatically even though the bios description says integrated graphics will be enabled when Auto is not selected.
When selecting "2. Intel HD 4000", my monitor doesn't display anything during POST. I can't rollback my bios settings without a CMOS reset.
When selecting "1. Auto", I have to connect my monitor to the onboard Displayport and wait for the operation system to boot after a black-screen
POST. And then I can reconnect the monitor to WX4100's Displayport.
Not like some other motherboard's bios, this bios doesn't have "always enabled" options for integrated graphics device.
Could anyone let me know how to locate the assembly codes that enables/disables HD4000 graphics device inside the bios file?
I would need this information as a starting point to hack the bios.
Thank you.
-iMSannob
DellOptiplex7010A29.zip (Size: 5.85 MB / Downloads: 0)
The bios of Dell Optiplex 7010 SFF always disables my i7-3770T's HD4000 when there is no monitor connected to the onboard Displayports.
My bios' Primary Display tab only has three options:
1. Auto
2. Intel HD 4000
3. AMD Radeon WX4100
When selecting "3. AMD Radeon WX4100", HD 4000 will be disabled automatically even though the bios description says integrated graphics will be enabled when Auto is not selected.
When selecting "2. Intel HD 4000", my monitor doesn't display anything during POST. I can't rollback my bios settings without a CMOS reset.
When selecting "1. Auto", I have to connect my monitor to the onboard Displayport and wait for the operation system to boot after a black-screen
POST. And then I can reconnect the monitor to WX4100's Displayport.
Not like some other motherboard's bios, this bios doesn't have "always enabled" options for integrated graphics device.
Could anyone let me know how to locate the assembly codes that enables/disables HD4000 graphics device inside the bios file?
I would need this information as a starting point to hack the bios.
Thank you.
-iMSannob

↧
↧
[REQUEST] Lenovo m91p unlocked bios with overclocking options
Hey there I have a lenovo m91p and I want to overclock it and no software works with it. There are no overclocking options in the bios. Please help.
↧
[REQUEST] Aorus x7 DT v8 bios unlock
hello, ive been considering attempting to unlock my aorus x7 dt v8 laptops bios to get access to the many features such as overclocking that are not included in my bios.
unsure about any protections in the bios and unsure what to use to flash it aswell or how to even.
my bios can be found here: https://download.gigabyte.com/FileList/B...c-f002.zip
hwinfo dump:
unsure about any protections in the bios and unsure what to use to flash it aswell or how to even.
my bios can be found here: https://download.gigabyte.com/FileList/B...c-f002.zip
hwinfo dump:
Motherboard ---------------------------------------------------------------
[Computer]
Computer Brand Name: GIGABYTE AORUS X7 DT V8
[Motherboard]
Motherboard Model: GIGABYTE AORUS X7YV8
Motherboard Chipset: Intel HM370 (Cannon Lake-H)
Motherboard Slots: 4xPCI Express x1, 3xPCI Express x4, 1xPCI Express x16
PCI Express Version Supported: v3.0
USB Version Supported: v3.1
[BIOS]
BIOS Manufacturer: American Megatrends Inc.
BIOS Date: 04/26/2018
BIOS Version: FB03
UEFI BIOS: Capable
Super-IO/LPC Chip: ITE IT8587E
BIOS ----------------------------------------------------------------------
BIOS Vendor: American Megatrends Inc.
BIOS Version: FB03
BIOS Release Date: 04/26/2018
BIOS Start Segment: F000
BIOS Size: 16 MBytes
System BIOS Version: 5.13
Embedded Controller Firmware Version: 3.2
ISA Support: Not Present
MCA Support: Not Present
EISA Support: Not Present
PCI Support: Present
PC Card (PCMCIA) Support: Not Present
Plug-and-Play Support: Not Present
APM Support: Not Present
Flash BIOS: Present
BIOS Shadow: Present
VL-VESA Support: Not Present
ESCD Support: Not Present
Boot from CD: Present
Selectable Boot: Present
BIOS ROM Socketed: Present
Boot from PC Card: Not Present
EDD Support: Present
NEC PC-98 Support: Not Present
ACPI Support: Present
USB Legacy Support: Present
AGP Support: Not Present
I2O Boot Support: Not Present
LS-120 Boot Support: Not Present
ATAPI ZIP Drive Boot Support: Not Present
IEE1394 Boot Support: Not Present
Smart Battery Support: Not Present
BIOS Boot Specification Support: Present
Function key-initiated Network Service Boot Support: Not Present
Targeted Content Distribution Support: Present
UEFI Specification Support: Present
Virtual Machine: Not Present
↧
Asus N550JX: AC760 problems
I've been having real problems with wifi card that started after a year or so after pc had been bought(march 2016). My card in Intel AC760, and the whole lineup is probably defected, as I've read that many other people with same module started having problems after some time of using. Problems persist on linux too, and I'm out of warranty, so I want to try to mess with uefi.
↧
↧
[REQUEST] HP 15 R201ne BIOS unlock
Hi!!!
I am currently doing an eGPU project for my laptop.
But it seems like my BIOS is blocking it
Here is the link for my laptop's BIOS
https://ftp.hp.com/pub/softpaq/sp93001-9...p93115.exe
And here are the screenshots:
https://imgur.com/QRPk9rC
https://imgur.com/1jRleFY
https://imgur.com/balDtIX
Just tell me if u need more infos abt this. Apparently I am new to this kind of thing.
Any help would be pretty much appreciated
I am currently doing an eGPU project for my laptop.
But it seems like my BIOS is blocking it
Here is the link for my laptop's BIOS
https://ftp.hp.com/pub/softpaq/sp93001-9...p93115.exe
And here are the screenshots:
https://imgur.com/QRPk9rC
https://imgur.com/1jRleFY
https://imgur.com/balDtIX
Just tell me if u need more infos abt this. Apparently I am new to this kind of thing.
Any help would be pretty much appreciated

↧
[REQUEST] HP 15-r201ne BIOS unlock
Hi!!!
I am currently doing an eGPU project for my laptop.
But it seems like my BIOS is blocking it
Here is the link for my laptop's BIOS
https://ftp.hp.com/pub/softpaq/sp93001-9...p93115.exe
And here are the screenshots:
https://imgur.com/QRPk9rC
https://imgur.com/1jRleFY
https://imgur.com/balDtIX
Just tell me if u need more infos abt this. Apparently I am new to this kind of thing.
Any help would be pretty much appreciated
I am currently doing an eGPU project for my laptop.
But it seems like my BIOS is blocking it
Here is the link for my laptop's BIOS
https://ftp.hp.com/pub/softpaq/sp93001-9...p93115.exe
And here are the screenshots:
https://imgur.com/QRPk9rC
https://imgur.com/1jRleFY
https://imgur.com/balDtIX
Just tell me if u need more infos abt this. Apparently I am new to this kind of thing.
Any help would be pretty much appreciated

↧
[Request] Dell 5447 remove bios whitelist
Hi i have a Dell 5447 and im trying to use egpu but my system wont boot up when i connect the egpu pcie adapter i think i have whitelist issue. Im trying to achive this by remplacing the wifi ngff card.
Bios: A13
Can anyone please help me to remove the whitelist from my bios?
sorry for my english.
Bios: A13
Can anyone please help me to remove the whitelist from my bios?
sorry for my english.
↧
ASRock G41M-VS3 R2.0 Fully Unlcoked bios mod
Can anyone make a bios mod for the ASRock G41M-VS3 R2.0 that allows overclocking on Pentium E5500 and Pentium E5700 with full voltage and RAM control?
↧
↧
[REQUEST] Fujitsu Lifebook E744 vPro Bios Unlock
Hi, I have a Fujitsu Lifebook E744 with i5-4310M onboard. I was wondering if there is a possibility to unlock voltage control of CPU (Core and Cache) and GPU (also ratio multiplier) for undervolting purpose (and other hidden things if they exist) in Phoenix v1.35 Bios dedicated for this notebook. Thanks in advance.
Bios download link:
https://www.shopfujitsu.com/CSPortal/driverdownload.do
Bios download link:
https://www.shopfujitsu.com/CSPortal/driverdownload.do
↧
[Request] Asus P5L-MX Windows 10 Support
Hello everyone, I am new here, I wanted to see if anyone could help me, I want to install Windows 10 on my Asus P5L-MX but it only supports natively up to Windows 8.1, is there a way to natively support Windows 10? Thank you!
BIOS:https://www.asus.com/latin/Motherboards/...Desk_BIOS/
BIOS:https://www.asus.com/latin/Motherboards/...Desk_BIOS/
↧
[MOD BIOS REQUEST] ASUS ET2002 All in One BIOS OC MENU
Hi everyone,
I want to overclock this all in One PC (ASUS ET2002),the problem Is that:there isn't any menu for overclocking .The BIOS file Is:https://dlcdnets.asus.com/pub/ASUS/DigitalHome/DAV/ET2002T/ET2002-ASUS-1103.zip
I tried to open the file with AMIBCP but i coudn't find any menu for overclocking, but there are the strings in the BIOS stings section ,so in theory It supports overclocking....
Can someone help me?
if i can't mod the BIOS, can i overclock via software with asrock octuner?
Sorry for my bad english.
Thanks
I want to overclock this all in One PC (ASUS ET2002),the problem Is that:there isn't any menu for overclocking .The BIOS file Is:https://dlcdnets.asus.com/pub/ASUS/DigitalHome/DAV/ET2002T/ET2002-ASUS-1103.zip
I tried to open the file with AMIBCP but i coudn't find any menu for overclocking, but there are the strings in the BIOS stings section ,so in theory It supports overclocking....
Can someone help me?
if i can't mod the BIOS, can i overclock via software with asrock octuner?
Sorry for my bad english.
Thanks
↧
acer travelmate 6293
This is an old laptop with phoenix bios.
It is possible to update the bios with the latest CPU micro-codes(released in 2015).
The bios is here:
v141.rar (Size: 940.73 KB / Downloads: 0)
It is possible to update the bios with the latest CPU micro-codes(released in 2015).
The bios is here:

↧
↧
[REQUEST] toshiba satellite c855-s5306 Bios unlock
Hi, new user here, I'm trying to install a EXP GDC Graphics card dock on my old Toshiba Satellite C855-S5306, But I'm having no luck getting video signal thru the card(RX 560 4GB). The screen is busted, so I'm trying to make this thing into a HTPC that can do some light gaming. I'm hoping that an unlocked bios may have some chance of helping me get it working. The laptop powers on, along with the card and dock light, but I get no picture, either from the gpu's hdmi or the laptops. I also have a i7 CPU coming in that should be compatible with this board(i7-3632QM), and I'm hoping that it will be a smoother install than this GPU. Any help would be greatly appreciated.
My current BIOS is 6.70: http://cdgenp01.csd.toshiba.com/content/...a8v670.exe.
Not too sure on what I'm doing here, so excuse me in advance if I have any extra questions.
My current BIOS is 6.70: http://cdgenp01.csd.toshiba.com/content/...a8v670.exe.
Not too sure on what I'm doing here, so excuse me in advance if I have any extra questions.
↧
Multiple BIOS On One USB
Hi everyone,
My company uses the same generic pc for all our customers.
But our customers request different versions of the BIOS to suit there needs.
Is there software that would boot from a USB stick with a simple menu to install the selected BIOS?
All our BIOS use EFI with statup.nsh
Thanks for your time!!!
My company uses the same generic pc for all our customers.
But our customers request different versions of the BIOS to suit there needs.
Is there software that would boot from a USB stick with a simple menu to install the selected BIOS?
All our BIOS use EFI with statup.nsh
Thanks for your time!!!
↧
[Help] Mobo AM4 1.8v Bios Connect JSPI1 with RPI for Reprogramming
Hello, guys.
I am facing a really problematic issue atm, I have a motherboard “B350M-MORTAR”. It has been laying around under my bed for around a year because of a failed bios upgrade. Now I replaced it for my current broken motherboard, which is currently broken.
Now I intent to repair the previous motherboard with the corrupted bios, I’ve tested it and it posts but since the bios is corrupted, it only shows a underscore blinking, keyboard and mouse wont work, nor usb drives.
I’ve tried everything trying to recover it, booting a boot drive with bios, using the renamed bios in a 4GB usb in fat32, etc, changing various components, no luck at all.
So I went searching for a while, and found out that the bios can be re-programmed, now here is where all my issues start:
I have a raspberry pi 4 working fine, but I can’t acquire any tool that will make this easier, because the current quarantine situation in almost every country in the world.
So my only solution is to use the raspberry pi.
I’ve tried to use various tutorials trying to accomplish this. Not sure if links are allowed to post but:
https://www.rototron.info/recover-bricke...pberry-pi/
https://www.eevblog.com/forum/repair/msi...ridge-apu/
https://imgur.com/a/n2ooe
Problem is that from all the tutorials I’ve read, none of them show the connections I should take in order to connect the Motherboard JSPI1 to the Raspberry PI, since in the tutorials people used other bios chips, or they are using other re-programming tools.
I am not intending to connect the raspberry pi directly to the chip, since I lack the skill desoldering and also lack the tools doing it, like the clip for direct connection, Now I can provide 1.8v power onto the chip (instead of 3.3v) like the guy with a similar board (second link) just by connecting the 24 pins in the Mobo, no cpu, no ram, etc.
But I have doubts with all the other pins, would anyone help me connect the JSPI1 from my motherboard to the raspberry pi?
My Bios chip is: MX25U12873F at 1.8v (attached capture/image)
Now I would usually buy another cheap motherboard, but there is no stores, in my country they are currently banned, and in Quarantine. And I must work.
Regarding the flashing method I think I won’t have any issues with this.
Thank you in advance.
I am facing a really problematic issue atm, I have a motherboard “B350M-MORTAR”. It has been laying around under my bed for around a year because of a failed bios upgrade. Now I replaced it for my current broken motherboard, which is currently broken.
Now I intent to repair the previous motherboard with the corrupted bios, I’ve tested it and it posts but since the bios is corrupted, it only shows a underscore blinking, keyboard and mouse wont work, nor usb drives.
I’ve tried everything trying to recover it, booting a boot drive with bios, using the renamed bios in a 4GB usb in fat32, etc, changing various components, no luck at all.
So I went searching for a while, and found out that the bios can be re-programmed, now here is where all my issues start:
I have a raspberry pi 4 working fine, but I can’t acquire any tool that will make this easier, because the current quarantine situation in almost every country in the world.
So my only solution is to use the raspberry pi.
I’ve tried to use various tutorials trying to accomplish this. Not sure if links are allowed to post but:
https://www.rototron.info/recover-bricke...pberry-pi/
https://www.eevblog.com/forum/repair/msi...ridge-apu/
https://imgur.com/a/n2ooe
Problem is that from all the tutorials I’ve read, none of them show the connections I should take in order to connect the Motherboard JSPI1 to the Raspberry PI, since in the tutorials people used other bios chips, or they are using other re-programming tools.
I am not intending to connect the raspberry pi directly to the chip, since I lack the skill desoldering and also lack the tools doing it, like the clip for direct connection, Now I can provide 1.8v power onto the chip (instead of 3.3v) like the guy with a similar board (second link) just by connecting the 24 pins in the Mobo, no cpu, no ram, etc.
But I have doubts with all the other pins, would anyone help me connect the JSPI1 from my motherboard to the raspberry pi?
My Bios chip is: MX25U12873F at 1.8v (attached capture/image)
Now I would usually buy another cheap motherboard, but there is no stores, in my country they are currently banned, and in Quarantine. And I must work.
Regarding the flashing method I think I won’t have any issues with this.
Thank you in advance.
↧
eeprom Chip searching on Motherboard
Hello, I'm quite new here(and to chip programming). I have a Acer Aspire V3-771G that I found in my garage and thought I could get it going for multimedia purposes. It was bios locked. However I Do have the ch341a setup with the Pin to connect it to the chip on the motherboard. Only problem is, I couldn't get the ch341a to read either chip attached to the motherboard. I took pictures of both chips, I just don't know which one I should be working on(if either). Any Suggestions?
![[Image: DK8l260.jpg]]()
![[Image: DK8l260.jpg]](http://i.imgur.com/DK8l260.jpg)
![[Image: 1zSKbRz.jpg]](http://i.imgur.com/1zSKbRz.jpg)
↧
↧
MSI ps63 8sc firmware unlock (fans control)
I’ve bought MSI ps63 8sc recently.
One of the key reasons why I’ve chosen it the fact the majority of reviewers stated that it is quiet under low load. As a particular, many people wrote that under low load (browsing/office) notebook is silent – something can be heard only if put an ear close to it.
However, I discovered that with my laptop this is not the case – without any load at all (=idle) fans are spinning around 2900-3100 RPM and produce loud sounds. It looks like the 2900-3000RPMs are set as minimum speeds at which fans start. I tried to play with custom profiles in MSI software and no matter how many percentage I put (10-20-30%) the fans always work at 2900-3000RPM minimum.
I’ve found several forum threads with owners of ps63. And several people in 2019 published screens of Creator Center where I can see the fan speeds around 1800-1900RPMs – so, this was possible.
But after that people are complaining that after they installed new firmware 16S1EMS1.105 fans became crazy and started to spin at around 3000RPM minimum (like in my case). Many people downgraded to 16S1EMS1.104 and again happy now.
But the problem is that ps63 has several ‘submodels’ – 8rd, 8sc etc. The firmwares 16S1EMS1.1xx is officially for MS-16S1 submodels. I have 16S2EMS1.102 preinstalled and this is for MS-16S2 submodels.
Obviously, my 16S2EMS1.102 is “new type” of firmware which doesn’t allow to fans to go below 2900-3000RPMs making notebook too loud.
Can somebody help me please with this issue? Is there a way to “unlock” firmware to directly modify parameters which are responsible for minimal RPMs of fans?
One of the key reasons why I’ve chosen it the fact the majority of reviewers stated that it is quiet under low load. As a particular, many people wrote that under low load (browsing/office) notebook is silent – something can be heard only if put an ear close to it.
However, I discovered that with my laptop this is not the case – without any load at all (=idle) fans are spinning around 2900-3100 RPM and produce loud sounds. It looks like the 2900-3000RPMs are set as minimum speeds at which fans start. I tried to play with custom profiles in MSI software and no matter how many percentage I put (10-20-30%) the fans always work at 2900-3000RPM minimum.
I’ve found several forum threads with owners of ps63. And several people in 2019 published screens of Creator Center where I can see the fan speeds around 1800-1900RPMs – so, this was possible.
But after that people are complaining that after they installed new firmware 16S1EMS1.105 fans became crazy and started to spin at around 3000RPM minimum (like in my case). Many people downgraded to 16S1EMS1.104 and again happy now.
But the problem is that ps63 has several ‘submodels’ – 8rd, 8sc etc. The firmwares 16S1EMS1.1xx is officially for MS-16S1 submodels. I have 16S2EMS1.102 preinstalled and this is for MS-16S2 submodels.
Obviously, my 16S2EMS1.102 is “new type” of firmware which doesn’t allow to fans to go below 2900-3000RPMs making notebook too loud.
Can somebody help me please with this issue? Is there a way to “unlock” firmware to directly modify parameters which are responsible for minimal RPMs of fans?
↧
HELP Panasonic CF 53 mk4 WiFi/Bluetooth
Hello
I have CF53-mk4, my wlan card was faulty, I replaced it with same type (Intel AC 7260 NGW. Now wlan work again, but bluetooth not, I dont see it in device manager. When I remove it and try with old card again bluetooth work I see it in device manager too, but new card nothing. Please where can be problem? I bought another card again, but still the same problem, wlan work but bluetooth not. In my bios I dont see anything about bluetooth. Someone can help me?
![[Image: clear.png]](http://forum.notebookreview.com/styles/default/xenforo/clear.png)
↧
Help Lenovo g580 5ECN33WW(v2.03)
всем привет. помогите решить проблему с белым списком файлов Lenovo g580. не принимает сторонний Wi-Fi. Сохраненный BIOS через универсальный BIOS Backup ToolKit 2.0 вот ссылка https://transfiles.ru/cbte0
↧