hello, can a xeon e3 v6 be installed on that prime z270-p motherboard? should i change the bios? It is that I have no idea. Thanks in advance
↧
prime z270-p
↧
Requesting CoffeeLake support for GA-Z170N Gaming 5
https://download.gigabyte.com/FileList/B...0bb1fe54d6
Hello, I have this board along with a pin-modded 9900K that I'd like to pair it with. I attempted to use CoffeeTime on it, but for some reason it will not boot.
Hello, I have this board along with a pin-modded 9900K that I'd like to pair it with. I attempted to use CoffeeTime on it, but for some reason it will not boot.
↧
↧
HP Pavilion x360 - 14-cd0009la
Hi guys, i need your help , need the advanced menu intro bios , but aren´t if the bios its into forum for this model notebook for download.
or I dump bios for advanced bios mod, what this metod for dump (arent ami or phenix).
thanks
or I dump bios for advanced bios mod, what this metod for dump (arent ami or phenix).
thanks
↧
[Old Hardware BIOS PXE] Lenovo X201 PXE Flash ROM Borked, trying to restore, ideas?
Couldn't find a BIOS support area, and this is not a MOD....more of a repair inquiry, hope this is the right area to inquire.
I have an old by everyone's standards Lenovo X201 laptop, was running Win10, no issues. One thing I noticed was that the Ethernet card Intel 82577LM had a Code 10 out of nowhere. Nothing fixed it, other drivers, switch to win 11. Thought hardware was borked and time to toss. I didn't do any updates like BIOS or drivers, so it was odd to suddenly see the Code 10. From what I've read on multiple pages, this doesn't seem to be uncommon as others have seen the same....good lord.
Installed Win7 since I couldn't find new Win10 x64 drivers for it and noticed that with Lenovo drivers, it worked, reported 1Gbps link proving hardware was ok. Ran speed tests, all good. So hardware is good.
Back to win10, still code 10. For some reason after reading pages on the web, many said to check the BIOS settings to see if that may fix it, so I enabled Boot Option ROM in the BIOS and blamo, the issue that was masked suddenly showed itself, now getting a Boot Agent Error (v1.5.31) on boot, nothing earth shattering, just that it can't boot PXE.
Long story short, I used intel boot utility tools and the utility BOOTUTILW64E.EXE from the PREBOOT toolchain, it basically stated NO FLASH FOUND. From images from the web, if PXE ROM was present, the tool would show the PXE FLASH image present. So it seems the LAN ROM is borked.
So running the command BOOTUTILW64E.EXE nic=1 -defcfg fixed the Code 10 immediately and now in Win10/11 the Ethernet works as expected. Link shows 1Gbps, driver from MS is good....in "that domain" all is good.
So the last item is to try and get the PXE image restored back into the NIC and fix the boot agent and Option ROM installed.
From everything I've read, being a laptop, it says that the OEM (Lenovo) BIOS update images should "update" the BIOS and the ECP controller and I/O's, things like the peripherals like the NIC ROM which contains the Intel Boot Agent. It has been stated that it can't be directly updated even if I had a valid PXE ROM.
I've tried for it update it by going all the way back to first BIOS FLASH to see if it would update the LAN Option ROM:
https://support.lenovo.com/us/en/do...32...p-thinkpad
I've tried 1.12, 1.31, 1.39, 1.40, and the 1.40-1.15/1.15 just to see if I could have it trigger an update to the ROM and put back the PXE boot image. None of it worked.
I'm trying to speak to Lenovo in the software group, but got disconnected, but will continue to try.
I will never use this feature, and I can turn off the error (Boot Agent Error) via the bios by turning off the option ROM, but this is more of an exercise as to learning how to fix this because I am the type that wants it to be 100%.
Anyone have any ideas on short of removing the bios chip and replacing it with one from ePay and then having to use their (Lenovo) maintenance disk to rebuild the UUID and serial number flashing which is a "final" resort if I can't find a software solution.
I don't want to trash this laptop, I use it as a backup for my travels, and the hardware is good, so please keep that in mind if you have a suggestion.
Thanks in advance for any thoughts or advice.
Chris
I have an old by everyone's standards Lenovo X201 laptop, was running Win10, no issues. One thing I noticed was that the Ethernet card Intel 82577LM had a Code 10 out of nowhere. Nothing fixed it, other drivers, switch to win 11. Thought hardware was borked and time to toss. I didn't do any updates like BIOS or drivers, so it was odd to suddenly see the Code 10. From what I've read on multiple pages, this doesn't seem to be uncommon as others have seen the same....good lord.
Installed Win7 since I couldn't find new Win10 x64 drivers for it and noticed that with Lenovo drivers, it worked, reported 1Gbps link proving hardware was ok. Ran speed tests, all good. So hardware is good.
Back to win10, still code 10. For some reason after reading pages on the web, many said to check the BIOS settings to see if that may fix it, so I enabled Boot Option ROM in the BIOS and blamo, the issue that was masked suddenly showed itself, now getting a Boot Agent Error (v1.5.31) on boot, nothing earth shattering, just that it can't boot PXE.
Long story short, I used intel boot utility tools and the utility BOOTUTILW64E.EXE from the PREBOOT toolchain, it basically stated NO FLASH FOUND. From images from the web, if PXE ROM was present, the tool would show the PXE FLASH image present. So it seems the LAN ROM is borked.
So running the command BOOTUTILW64E.EXE nic=1 -defcfg fixed the Code 10 immediately and now in Win10/11 the Ethernet works as expected. Link shows 1Gbps, driver from MS is good....in "that domain" all is good.
So the last item is to try and get the PXE image restored back into the NIC and fix the boot agent and Option ROM installed.
From everything I've read, being a laptop, it says that the OEM (Lenovo) BIOS update images should "update" the BIOS and the ECP controller and I/O's, things like the peripherals like the NIC ROM which contains the Intel Boot Agent. It has been stated that it can't be directly updated even if I had a valid PXE ROM.
I've tried for it update it by going all the way back to first BIOS FLASH to see if it would update the LAN Option ROM:
https://support.lenovo.com/us/en/do...32...p-thinkpad
I've tried 1.12, 1.31, 1.39, 1.40, and the 1.40-1.15/1.15 just to see if I could have it trigger an update to the ROM and put back the PXE boot image. None of it worked.
I'm trying to speak to Lenovo in the software group, but got disconnected, but will continue to try.
I will never use this feature, and I can turn off the error (Boot Agent Error) via the bios by turning off the option ROM, but this is more of an exercise as to learning how to fix this because I am the type that wants it to be 100%.
Anyone have any ideas on short of removing the bios chip and replacing it with one from ePay and then having to use their (Lenovo) maintenance disk to rebuild the UUID and serial number flashing which is a "final" resort if I can't find a software solution.
I don't want to trash this laptop, I use it as a backup for my travels, and the hardware is good, so please keep that in mind if you have a suggestion.
Thanks in advance for any thoughts or advice.
Chris
↧
[REQUEST[ Lenovo Ideapad 5 / XiaoXin Pro 16 ARH7
I just can't seem to get into the advance menu. Tried every Lenovo Youtube vid. Any help would be highly appreciated.
![.zip]( "ZIP File")
WinJ4CN33WW.zip (Size: 14.69 MB / Downloads: 1)
WinJ4CN33WW.zip (Size: 14.69 MB / Downloads: 1)
↧
↧
[Request] BIOS Unlock HP Pavilion x360 - 14-cd0009la
Hi guys, i need your help , need the advanced menu intro bios , but aren´t if the bios its into forum for this model notebook for download.
or I dump bios for advanced bios mod, what this metod for dump (arent ami or phenix).
thanks
or I dump bios for advanced bios mod, what this metod for dump (arent ami or phenix).
thanks
↧
[REQUEST] Gigabyte Aero 15 XC BIOS Unlock
Hello! I'm requesting aero 15 xc bios unlock.
BIOS version is HFB07, CPU is i7-10870H, and GPU is RTX3070 Laptop.
Grub shell boot from USB succesed.
and dump file link. (and on attachment file)
https://mega.nz/file/MEUHnArL#Q04X8i20PX...NMlwk1nbIk
https://www.mediafire.com/file/cqkpvc24o...p.rom/file
and below code is dump cmds saying.
(same tool and same WARNING from this guy - https://www.bios-mods.com/forum/Thread-R...nlock-FB03)
am i doing not well?
Code:
Intel (R) Flash Programming Tool Version: 14.0.33.1125
Copyright (C) 2005 - 2020, Intel Corporation. All rights reserved.
Reading HSFSTS register... Flash Descriptor: Valid
--- Flash Devices Found ---
ID:0xEF4019 Size: 32768KB (262144Kb)
- Reading Flash [0x1000000] 12288KB of 12288KB - 100 percent complete.
Writing flash contents to file "dump.rom"...
Memory Dump Complete
Warning: There are some addresses that are not defined in any regions.Read/Write/Erase operations are not possible on those addresses.
FPT Operation Successful.
Done. Press any key to exit.
dumped_bios.zip (Size: 6.22 MB / Downloads: 2)
↧
[REQUEST] Thinkpad x1 Gen3 Tablet 20KJ-SOPM00 Bios Unlock
Dear Team of Bios-mods, Hello everyone
i have a Thinkpad X1 Tablet model 20KJ-SOPM00 Core i7 8650U 8Go Ram 256 Go Samsung NVMe M2 Disk
two connectors USB-C controller Thunderbolt 3 + NanoSim LTE and microSD reader
i tried all things to install Windows 7 but i failed it get me really crazy !!
The Bios is UEFI only the Legacy Bios is deleted by the manufacturer
There is no Legacy neither CSM Bios
Please help me to get these options (Legacy & CSM Bios) enabled again
The original file of the version bios installed in my machine is:
https://download.lenovo.com/pccbbs/mobiles/n1zuj27w.exe
The page link is:
https://support.lenovo.com/us/en/downloa...-20kj-20kk
Sorry to do not provide you my extracted bios file because your given link is down and i can't found it elsewhere
your broken link : http://www.mediafire.com/?x5cgqau5i8w3fc3
Thank you so much in advance
you deserve all of the best for doing a great job !
Best regards
Dave
i have a Thinkpad X1 Tablet model 20KJ-SOPM00 Core i7 8650U 8Go Ram 256 Go Samsung NVMe M2 Disk
two connectors USB-C controller Thunderbolt 3 + NanoSim LTE and microSD reader
i tried all things to install Windows 7 but i failed it get me really crazy !!
The Bios is UEFI only the Legacy Bios is deleted by the manufacturer
There is no Legacy neither CSM Bios
Please help me to get these options (Legacy & CSM Bios) enabled again
The original file of the version bios installed in my machine is:
https://download.lenovo.com/pccbbs/mobiles/n1zuj27w.exe
The page link is:
https://support.lenovo.com/us/en/downloa...-20kj-20kk
Sorry to do not provide you my extracted bios file because your given link is down and i can't found it elsewhere
your broken link : http://www.mediafire.com/?x5cgqau5i8w3fc3
Thank you so much in advance
you deserve all of the best for doing a great job !
Best regards
Dave
↧
[REQUEST] Acer Aspire 5 A515-51G-51V7 Unlocked BIOS
Hi all, i'm new on the forum. I want to ask if is it possible to get an unlocked/advanced bios for my PC, i have an Acer Aspire 5, model A515-51G-51V7 equiped with I5-8250U and 20GB of ram. I use a GTX1660 Super as external GPU (Connected with an adaptator through the m2 slot). So i want a unlocked bios to unlock the TDP (when gaming my cpu doesn't run at it's maximum performance, acer locked at 15W but intel declare 25W for my CPU.
My bios is Inside Rev. 5 Version 2.02
direct link of my bios: https://global-download.acer.com/GDFiles...SC=EMEA_17
thanks for your attention and the time you spent here!
My bios is Inside Rev. 5 Version 2.02
direct link of my bios: https://global-download.acer.com/GDFiles...SC=EMEA_17
thanks for your attention and the time you spent here!
↧
↧
Bios Mod UUID + Serial Change (insyde)
Hello, I got a locked insyde bios for an an acer nitro 5 (AN515-54) the bios mods are all specific to the user so there isn't a one mod fit all file making it hard to modify. In my case, im trying to change my motherboards UUID and serials, but my tools can't write to the SMBIOS because presumably it is locked. Would there be a bios mod one could make that would enable an insyde tool to write to SMBIOS from windows at any time?
↧
Lenovo B51-80 whitelist
HI
I need removal wifi whitelist
thanx
Werry thanx Dudu2002
problem solved ,this bin not locked
I need removal wifi whitelist
thanx
Werry thanx Dudu2002
problem solved ,this bin not locked
↧
[Request] Asus GL503GE unlock undervolting features
Hello, I'm the proud owner of the Asus Toaster Strix GL503GE which is suffering extreme heat problem which could disappear with undervolting, the problem is, Intel removed the features so I've been trying to load an older Bios (316) lastest being (319) without getting undervolting back. I would like to know if my BIOS can be edited to get undervolting back ?
Thanks in advance for any answer toward my request.
Thanks in advance for any answer toward my request.
↧
[REQUEST] Lenovo ideapad 320-15IAP unlock bios, advanced settings
Hello, please unlock advanced settings in my bios.
Bios version: 5RCN36WW
Photo my bios: https://drive.google.com/file/d/1n-V-giU...sp=sharing
![.bin]()
bios_lenovo_ideapad_320_15IAP.bin (Size: 4 MB / Downloads: 1)
Bios version: 5RCN36WW
Photo my bios: https://drive.google.com/file/d/1n-V-giU...sp=sharing
bios_lenovo_ideapad_320_15IAP.bin (Size: 4 MB / Downloads: 1)
↧
↧
Lenovo Thinkpad e220s WiFi whitelist request
Hi
I want to use my another wifi chip on this thinkpad e220s laptop, but the bios blocking it.
Can I request bios mod whitelist removal?
This is the official bios link:
https://download.lenovo.com/ibmdl/pub/pc...uj12us.exe
Thanks!
I want to use my another wifi chip on this thinkpad e220s laptop, but the bios blocking it.
Can I request bios mod whitelist removal?
This is the official bios link:
https://download.lenovo.com/ibmdl/pub/pc...uj12us.exe
Thanks!
↧
[HOW-TO] LG Gram 14Z970 Phoenix BIOS Strings extract
Request solved - here is the How-To:
I found out how to extract the strings: Releases · BoringBoredom/UEFI-Editor (github.com)
Open the bios in UEFITool. Press CTRL + F and perform a Text search for any known BIOS setting name. Double-click the reference to the section at the bottom, right-click the section (usually under Setup) and press Extract as is....
Convert the extracted file with IRFExtractor. Rename the output to a.txt, move it to the folder containing this script and run it.
This was my Request:
I found out how to extract the strings: Releases · BoringBoredom/UEFI-Editor (github.com)
Open the bios in UEFITool. Press CTRL + F and perform a Text search for any known BIOS setting name. Double-click the reference to the section at the bottom, right-click the section (usually under Setup) and press Extract as is....
Convert the extracted file with IRFExtractor. Rename the output to a.txt, move it to the folder containing this script and run it.
This was my Request:
Quote:Hi,
I have an issue with the 20V 2.25A DC requirements of my Laptop:
If an external Monitor is connected and battery is charged, a 30W charger is sufficient to provide 20V 1.5A
But if you do not use an external Monitor, the DC input will go over 2A for a split second.
This behavior makes it impossible to use a lightweight 30W charger, even if the device isn't actually pulling 30W. The initial request makes all my 30W adapters go on and off repeatedly.
I would like to know if there is any option in the hidden menus of the bios file which may could affect the behavior of the DC plug.
The USB-C plug is not usable, it only accepts 18W over Power delivery. And even worse, if your PD charger has PPS, the laptop gets confused during PD negotiation and will not take any power over USB-C at all.
So I have to intentionally search for USB-C PD chargers which don't have PPS to get at least 18W.
I don't think we can patch this, so I bought an PD Trigger which negotiations for 20V and this little trigger device can be plugged into the DC port. But my 30W adapters can not handle this. Only the heavy 45W adapters work
But as soon as I connect an external Display, it accepts 30W adapters.
I hope you have better tools than me and have some time to help me with an extract of the hidden menus, because searching through with a hex editor is painful and doesn't expose the possible select options.
Here is the BIOS
backup.zip (Size: 3.34 MB / Downloads: 1)
Kind Regards
Falco
↧
toshiba p100 wifi whitelist
Is it possible to whitelist an Intel dual band wireless ac 7260 for my toshiba p100 PSPA0C-06X02C.
If I put in any other card in the laptop it wont fully boot..its on but no bios screen. the wifi card in it is the worst
Intel pro wireless 3945abg.
link to bios...https://support.dynabook.com/support/modelHome?freeText=1200012716&osId=3333635
Thanks.
If I put in any other card in the laptop it wont fully boot..its on but no bios screen. the wifi card in it is the worst
Intel pro wireless 3945abg.
link to bios...https://support.dynabook.com/support/modelHome?freeText=1200012716&osId=3333635
Thanks.
↧
Lenovo B51-80 whitelist
HI
I need removal wifi whitelist
thanx
Werry thanx Dudu2002
problem solved ,this bin not locked
I need removal wifi whitelist
thanx
Werry thanx Dudu2002
problem solved ,this bin not locked
↧
↧
[REQUEST] HP Pavilion Gaming 15 ec0043ur
CPU: AMD Ryzen 7 3750H
GPU: NVIDIA GTX 1660 Ti Max-Q
RAM: 16 GB
CURRENT BIOS VERSION: F.15 Rev. A
Hello! I would like to unlock the BIOS on this laptop since I want to lock frequencies to 3000 MHz to make this laptop not to boost to 4Ghz cause it's heating up to 103 C. I repasted it a lot of times, cleaned it - no luck.
Disabling turbo-boost in Windows control panel, setting maximum processor state to 99% makes this laptop run NOT at the stock frequency which is 2.3 GHz, for some reason it makes it run at 1.7 GHz which is really low and games run like a crap at this frequency.
So I would like to know if it's possible to unlock BIOS on this laptop. I would be really grateful if you help me with that.
Latest BIOS of this laptop link: https://ftp.hp.com/pub/softpaq/sp142001-...142331.exe
GPU: NVIDIA GTX 1660 Ti Max-Q
RAM: 16 GB
CURRENT BIOS VERSION: F.15 Rev. A
Hello! I would like to unlock the BIOS on this laptop since I want to lock frequencies to 3000 MHz to make this laptop not to boost to 4Ghz cause it's heating up to 103 C. I repasted it a lot of times, cleaned it - no luck.
Disabling turbo-boost in Windows control panel, setting maximum processor state to 99% makes this laptop run NOT at the stock frequency which is 2.3 GHz, for some reason it makes it run at 1.7 GHz which is really low and games run like a crap at this frequency.
So I would like to know if it's possible to unlock BIOS on this laptop. I would be really grateful if you help me with that.
Latest BIOS of this laptop link: https://ftp.hp.com/pub/softpaq/sp142001-...142331.exe
↧
Request Removing the HP mini 110-3707er whitelist
Hello, help me with HP Mini 110-3707er whitelist removal. ID 1584, Version F.25, Insyde
↧
[HOW-TO] LG Gram 14Z970 Phoenix BIOS Strings extract
Request solved - here is the How-To:
I found out how to extract the strings: Releases · BoringBoredom/UEFI-Editor (github.com)
Open the bios in UEFITool. Press CTRL + F and perform a Text search for any known BIOS setting name. Double-click the reference to the section at the bottom, right-click the section (usually under Setup) and press Extract as is....
Convert the extracted file with IRFExtractor. Rename the output to a.txt, move it to the folder containing this script and run it.
This was my Request:
I found out how to extract the strings: Releases · BoringBoredom/UEFI-Editor (github.com)
Open the bios in UEFITool. Press CTRL + F and perform a Text search for any known BIOS setting name. Double-click the reference to the section at the bottom, right-click the section (usually under Setup) and press Extract as is....
Convert the extracted file with IRFExtractor. Rename the output to a.txt, move it to the folder containing this script and run it.
This was my Request:
Quote:Hi,
I have an issue with the 20V 2.25A DC requirements of my Laptop:
If an external Monitor is connected and battery is charged, a 30W charger is sufficient to provide 20V 1.5A
But if you do not use an external Monitor, the DC input will go over 2A for a split second.
This behavior makes it impossible to use a lightweight 30W charger, even if the device isn't actually pulling 30W. The initial request makes all my 30W adapters go on and off repeatedly.
I would like to know if there is any option in the hidden menus of the bios file which may could affect the behavior of the DC plug.
The USB-C plug is not usable, it only accepts 18W over Power delivery. And even worse, if your PD charger has PPS, the laptop gets confused during PD negotiation and will not take any power over USB-C at all.
So I have to intentionally search for USB-C PD chargers which don't have PPS to get at least 18W.
I don't think we can patch this, so I bought an PD Trigger which negotiations for 20V and this little trigger device can be plugged into the DC port. But my 30W adapters can not handle this. Only the heavy 45W adapters work
But as soon as I connect an external Display, it accepts 30W adapters.
I hope you have better tools than me and have some time to help me with an extract of the hidden menus, because searching through with a hex editor is painful and doesn't expose the possible select options.
Here is the BIOS
backup.zip (Size: 3.34 MB / Downloads: 1)
Kind Regards
Falco
↧