Hi, guys!
I had a whitelisted bios + advanced menu and unlocked vbios for lenovo y50-70 touch. Today I decided to undervolt the cpu in the advanced / overclocking tab in the bios. I tested -90mv stable in windows, but when i applied -70mv in bios and hit F10 and saved, the laptop shut down and never wants to get to the POST screen. I tried disconnecting the bios battery, main battery swapping ram, holding power on when everything above disconnected - still nothing after multiple attempts. (I never tried to disconnect the SSD, but I dont think it would make any difference). After all these attempts, I also tried to start the laptop and leave it for 1 hr - nothing. Looks like my settings have been "programmed" into the chip?!. When I start the computer the keyboard is on (caps lock / num lock dont respond with the little light indicator). Cpu & GPU under the heatpipes are hot after 1 hour of "trying to boot" operation. Any ideas how to fix that problem?
Thank you very much!
I had a whitelisted bios + advanced menu and unlocked vbios for lenovo y50-70 touch. Today I decided to undervolt the cpu in the advanced / overclocking tab in the bios. I tested -90mv stable in windows, but when i applied -70mv in bios and hit F10 and saved, the laptop shut down and never wants to get to the POST screen. I tried disconnecting the bios battery, main battery swapping ram, holding power on when everything above disconnected - still nothing after multiple attempts. (I never tried to disconnect the SSD, but I dont think it would make any difference). After all these attempts, I also tried to start the laptop and leave it for 1 hr - nothing. Looks like my settings have been "programmed" into the chip?!. When I start the computer the keyboard is on (caps lock / num lock dont respond with the little light indicator). Cpu & GPU under the heatpipes are hot after 1 hour of "trying to boot" operation. Any ideas how to fix that problem?
Thank you very much!