Hi, I have buy there is 6 months a Tyan I5400PL s5393(w/o SAS controller), but it doesn't support FSB1600 and I can't make a pin mod on it, and now i have only DDR2 667mhz.
But I would like modified the FSB In BIOS because I must run SetFSB on windows and restart my computer and if you can unlock settings for CPU voltage or memory voltage(memory voltage is the setting I need) and settings about the Cas latency and cie
this is my motherboard: http://www.tyan.com/Motherboards_S5393_S5393WG2NR
and this is the newest bios: http://ftp.ftp.tyan.com/bios/S5393_v105.zip
I know that is a big work but if you can't modified the ram setting I'm happy just with FSB :![Smile]( "Smile")
ut if tou can unlock ram setting I can go higher than 5% overclock ![Smile]( "Smile")
thank you, have a nice day![Smile]( "Smile")
But I would like modified the FSB In BIOS because I must run SetFSB on windows and restart my computer and if you can unlock settings for CPU voltage or memory voltage(memory voltage is the setting I need) and settings about the Cas latency and cie
this is my motherboard: http://www.tyan.com/Motherboards_S5393_S5393WG2NR
and this is the newest bios: http://ftp.ftp.tyan.com/bios/S5393_v105.zip
I know that is a big work but if you can't modified the ram setting I'm happy just with FSB :
ut if tou can unlock ram setting I can go higher than 5% overclock thank you, have a nice day