Hi there, I have a :
Toshiba Satellite P300-1A0
Model No: PSPC4E-06L00YGR
here, which shows a black screen only. Power button is lid, trackpad is lid, Satellite Logo is lid and the touch buttons are all lid. Screen stays black and Windows wont boot.
I removed and exchanged both RAM slots.
I removed HDDs and DVD and wanted to try Crisis Recovery now. BIOS is V 4.20.
But neither Fn+B or WinKey+B works to boot from the Ready USB Stick.
Booting via USB Stick, FN+Esc will do 1 long beep + 2 short beeps (very loud)...according to my research its the graphics chip. :S
Booting via USB Floppy...a series of 10 beeps (followed by 1 more beep after 5 seconds) appears while the floppy starts to load. Then 1 loud beep every 15 seconds...while the floppy loads...then no more beeps and floppy stops doing anything. Power LED and Power Button keep blinking, fan is spinning.
I tried to name the bios file BIOS.WPH and BIOS.FD
Naming it BIOS.FD there will be one loud short deep tone and 2 high pitched tones...floppy stops.
Power LED and Power Button keep blinking, fan is spinning.
http://www.toshiba.de/support/my-product/laptops/
According to this page I need an external Floppy and a USB Dongle to do Crisis Recovery.
Would that be true ? :S Any alternatives ? What about phlash.ini ?
https://forum.toshiba.eu/showthread.php?...-corrupted
I let it run after the beeps and power button and power LED blinking for more then 20 minutes...it wont shut down...and I have to switch it off.
Still, black screen and windows wont boot.
Toshiba Satellite P300-1A0
Model No: PSPC4E-06L00YGR
here, which shows a black screen only. Power button is lid, trackpad is lid, Satellite Logo is lid and the touch buttons are all lid. Screen stays black and Windows wont boot.
I removed and exchanged both RAM slots.
I removed HDDs and DVD and wanted to try Crisis Recovery now. BIOS is V 4.20.
But neither Fn+B or WinKey+B works to boot from the Ready USB Stick.
Booting via USB Stick, FN+Esc will do 1 long beep + 2 short beeps (very loud)...according to my research its the graphics chip. :S
Booting via USB Floppy...a series of 10 beeps (followed by 1 more beep after 5 seconds) appears while the floppy starts to load. Then 1 loud beep every 15 seconds...while the floppy loads...then no more beeps and floppy stops doing anything. Power LED and Power Button keep blinking, fan is spinning.
I tried to name the bios file BIOS.WPH and BIOS.FD
Naming it BIOS.FD there will be one loud short deep tone and 2 high pitched tones...floppy stops.
Power LED and Power Button keep blinking, fan is spinning.
http://www.toshiba.de/support/my-product/laptops/
According to this page I need an external Floppy and a USB Dongle to do Crisis Recovery.
Would that be true ? :S Any alternatives ? What about phlash.ini ?
https://forum.toshiba.eu/showthread.php?...-corrupted
I let it run after the beeps and power button and power LED blinking for more then 20 minutes...it wont shut down...and I have to switch it off.
Still, black screen and windows wont boot.