Hello, first i'd like to congratulate all of you smart people out there, good work, i learned a lot around here.
Second, i'd like the adv menu mode in order to troubleshoot a problem with the egpu compatibility (i've soldered a 1x pcie port in the side of the notebook then i run the pcie signal trough an IDE cable to keep the same distance between the differential pins to solder to a scratched wireless mpcie board. I had a toshiba once that had two mpcie's, the other one was outside in a ribbon and easily solderable because there was no mpcie connector in the board, i used this egpu in that board, i know it works and it should be a software problem in the new laptop. Plus i like having control over my sh1t. Thank you.
the files:
https://www.sendspace.com/file/1aloqw
Second, i'd like the adv menu mode in order to troubleshoot a problem with the egpu compatibility (i've soldered a 1x pcie port in the side of the notebook then i run the pcie signal trough an IDE cable to keep the same distance between the differential pins to solder to a scratched wireless mpcie board. I had a toshiba once that had two mpcie's, the other one was outside in a ribbon and easily solderable because there was no mpcie connector in the board, i used this egpu in that board, i know it works and it should be a software problem in the new laptop. Plus i like having control over my sh1t. Thank you.
the files:
https://www.sendspace.com/file/1aloqw